Ultra-compact, densely integrated optical components manufactured on a CMOS-foundry platform are highly desirable for optical information processing and electronic-photonic co-integration. However, the large spatial extent of evanescent waves arising from nanoscale confinement, ubiquitous in silicon photonic devices, causes significant cross-talk and scattering loss. Here, we demonstrate that anisotropic all-dielectric metamaterials open a new degree of freedom in total internal reflection to shorten the decay length of evanescent waves. We experimentally show the reduction of cross-talk by greater than 30 times and the bending loss by greater than 3 times in densely integrated, ultra-compact photonic circuit blocks. Our prototype all-dielectric metamaterial-waveguide achieves a low propagation loss of approximately 3.7±1.0 dB/cm, comparable to those of silicon strip waveguides. Our approach marks a departure from interference-based confinement as in photonic crystals or slot waveguides, which utilize nanoscale field enhancement. Its ability to suppress evanescent waves without substantially increasing the propagation loss shall pave the way for all-dielectric metamaterial-based dense integration.
Extreme Thermal Materials
Nanoscale metamaterials exhibit extraordinary optical properties and are proposed for various technological applications. Here, a new class of novel nanoscale two-phase hybrid metamaterials is achieved by combining two major classes of traditional plasmonic materials, metals (e.g., Au) and transition metal nitrides (e.g., TaN, TiN, and ZrN) in an epitaxial thin film form via the vertically aligned nanocomposite platform. By properly controlling the nucleation of the two phases, the nanoscale artificial plasmonic lattices (APLs) consisting of highly ordered hexagonal close packed Au nanopillars in a TaN matrix are demonstrated. More specifically, uniform Au nanopillars with an average diameter of 3 nm are embedded in epitaxial TaN platform and thus form highly 3D ordered APL nanoscale metamaterials. Novel optical properties include highly anisotropic reflectance, obvious nonlinear optical properties indicating inversion symmetry breaking of the hybrid material, large permittivity tuning and negative permittivity response over a broad wavelength regime, and superior mechanical strength and ductility. The study demonstrates the novelty of the new hybrid plasmonic scheme with great potentials in versatile material selection, and, tunable APL spacing and pillar dimension, all important steps toward future designable hybrid plasmonic materials.
Alberta has one of the largest oil reserves in the world. Large-scale commercial oil production from oil sands in Alberta for the past 40 years has led to accumulation of tailings water in tailings ponds covering areas ranging over 150 km2. Less than 1% of this area has been certified as reclaimed leading to both economic and environmental consequences. Research is underway to reduce tailings ponds reclamation time from decades to weeks by developing new polymer flocculants, better tailings treatment methods and recovering bitumen from tailings. Information about impact of residual bitumen on the shear strength, trafficability, densification, hydraulic conductivity, consolidation, post-reclamation settlement for oil sands tailings is insufficient. Outstanding challenges exist in understanding bitumen and clay interaction in tailings to help with the development of techniques which accelerate clay sedimentation and enhance bitumen recovery. To shed light on the bitumen-clay interactions, here we develop advanced three-dimensional optical tomography approaches approaching sub-micron resolution. In this paper, we report, the first ever Total Internal Reflection Fluorescence (TIRF) microscope tomography for Mature Fine Tailings (MFT) samples to reveal bitumen distribution on clay in MFT. We employ a unique evanescent wave illumination approach as opposed to conventional fluorescence microscopy with enhanced axial resolution and high signal-to-noise ratio. The resolution of TIRF is further improved by using an Axial Super-Resolution Evanescent-wave Tomography (AxSET) technique. The information obtained from this study not only gives evidence of the presence of hydrophilic and oleophilic clays but with aid of 3D reconstruction using advance image processing also validates that bitumen is partially coating some of clay surfaces, thus verifying the presence of biwettable clays in oil sands MFT. The advances from our imaging work can aid the development of bitumen recovery techniques for environmental and economic impact.
The key feature of a thermophotovoltaic (TPV) emitter is the enhancement of thermal emission corresponding to energies just above the bandgap of the absorbing photovoltaic cell and simultaneous suppression of thermal emission below the bandgap. We show here that a single layer plasmonic coating can perform this task with high efficiency. Our key design principle involves tuning the epsilon-near-zero frequency (plasma frequency) of the metal acting as a thermal emitter to the electronic bandgap of the semiconducting cell. This approach utilizes the change in the reflectivity of a metal near its plasma frequency (epsilon-near-zero frequency) to lead to spectrally selective thermal emission, and can be adapted to large area coatings using high temperature plasmonic materials. We provide a detailed analysis of the spectral and angular performance of high temperature plasmonic coatings as TPV emitters. We show the potential of such high temperature plasmonic thermal emitter coatings (p-TECs) for narrowband near-field thermal emission. We also show the enhancement of near-surface energy density in graphene-multilayer thermal metamaterials due to a topological transition at an effective epsilon-near-zero frequency. This opens up spectrally selective thermal emission from graphene multilayers in the infrared frequency regime. Our design paves the way for the development of single layer p-TECs and graphene multilayers for spectrally selective radiative heat transfer applications.
Control of thermal radiation at high temperatures is vital for waste heat recovery and for high-efficiency thermophotovoltaic (TPV) conversion. Previously, structural resonances utilizing gratings, thin film resonances, metasurfaces and photonic crystals were used to spectrally control thermal emission, often requiring lithographic structuring of the surface and causing significant angle dependence. In contrast, here, we demonstrate a refractory W-HfO2 metamaterial, which controls thermal emission through an engineered dielectric response function. The epsilon-near-zero frequency of a metamaterial and the connected optical topological transition (OTT) are adjusted to selectively enhance and suppress the thermal emission in the near-infrared spectrum, crucial for improved TPV efficiency. The near-omnidirectional and spectrally selective emitter is obtained as the emission changes due to material properties and not due to resonances or interference effects, marking a paradigm shift in thermal engineering approaches. We experimentally demonstrate the OTT in a thermally stable metamaterial at high temperatures of 1,000 °C.
The ideal material for nanophotonic applications will have a large refractive index at optical frequencies, respond to both the electric and magnetic fields of light, support large optical chirality and anisotropy, confine and guide light at the nanoscale, and be able to modify the phase and amplitude of incoming radiation in a fraction of a wavelength. Artificial electromagnetic media, or metamaterials, based on metallic or polar dielectric nanostructures can provide many of these properties by coupling light to free electrons (plasmons) or phonons (phonon polaritons), respectively, but at the inevitable cost of significant energy dissipation and reduced device efficiency. Recently, however, there has been a shift in the approach to nanophotonics. Low-loss electromagnetic responses covering all four quadrants of possible permittivities and permeabilities have been achieved using completely transparent and high-refractive-index dielectric building blocks. Moreover, an emerging class of all-dielectric metamaterials consisting of anisotropic crystals has been shown to support large refractive index contrast between orthogonal polarizations of light. These advances have revived the exciting prospect of integrating exotic electromagnetic effects in practical photonic devices, to achieve, for example, ultrathin and efficient optical elements, and realize the long-standing goal of subdiffraction confinement and guiding of light without metals. In this Review, we present a broad outline of the whole range of electromagnetic effects observed using all-dielectric metamaterials: high-refractive-index nanoresonators, metasurfaces, zero-index metamaterials and anisotropic metamaterials. Finally, we discuss current challenges and future goals for the field at the intersection with quantum, thermal and silicon photonics, as well as biomimetic metasurfaces.
Optical tomographic reconstruction of a three-dimensional (3D) nanoscale specimen is hindered by the axial diffraction limit, which is 2–3 times worse than the focal plane resolution. We propose and experimentally demonstrate an axial super-resolution evanescent wave tomography method that enables the use of regular evanescent wave microscopes like the total internal reflection fluorescence microscope beyond surface imaging and achieve a tomographic reconstruction with axial super-resolution. Our proposed method based on Fourier reconstruction achieves axial super-resolution by extracting information from multiple sets of 3D fluorescence images when the sample is illuminated by an evanescent wave. We propose a procedure to extract super-resolution features from the incremental penetration of an evanescent wave and support our theory by one-dimensional (along the optical axis) and 3D simulations. We validate our claims by experimentally demonstrating tomographic reconstruction of microtubules in HeLa cells with an axial resolution of ∼130 nm∼130 nm. Our method does not require any additional optical components or sample preparation. The proposed method can be combined with focal plane super-resolution techniques like stochastic optical reconstruction microscopy and can also be adapted for THz and microwave near-field tomography.
Optical metamaterials have redefined how we understand light in notable ways: from strong response to optical magnetic fields, negative refraction, fast and slow light propagation in zero index and trapping structures, to flat, thin and perfect lenses. Many rules of thumb regarding optics, such as μ = 1, now have an exception, and basic formulas, such as the Fresnel equations, have been expanded. The field of metamaterials has developed strongly over the past two decades. Leveraging structured materials systems to generate tailored response to a stimulus, it has grown to encompass research in optics, electromagnetics, acoustics and, increasingly, novel hybrid material responses. This roadmap is an effort to present emerging fronts in areas of optical metamaterials that could contribute and apply to other research communities. By anchoring each contribution in current work and prospectively discussing future potential and directions, the authors are translating the work of the field in selected areas to a wider community and offering an incentive for outside researchers to engage our community where solid links do not already exist.
A major waste byproduct of oil sands in situ extraction is oil sands tailings, which are a mixture of water, clay, and residual bitumen. These tailings represent a huge ecological footprint in the form of tailings ponds, which not only render large land areas unusable but also prevent reuse of water. The slow dewatering of the tailings ponds poses a major challenge to the industry. The presence of complex inorganic–organic bitumen–clay mixtures in these tailings contributes to this problem. Hence, understanding the nature of the bitumen–clay association and the effect of bitumen on clay particle–particle interactions is important for the development of more effective chemicals or processes to accelerate particle aggregation and sedimentation during dewatering. Previous studies that investigate these interactions used techniques that are sensitive only toward inorganic clay but not sensitive towards organic bitumen. Here, we use a high-resolution total internal reflection fluorescence (TIRF) microscopy to help identify the accurate location and distribution of bitumen in mature fine tailings (MFT) samples. We report the first adaptation of TIRF beyond cell biology for visualization of bitumen and its interaction with clay. The high signal-to-noise ratio of TIRF microscopy and a high contrast between the clay and residual bitumen provide images that reveal a wealth of information about the bitumen coverage on clay as well as clay–clay aggregates and how the bitumen positions itself within these aggregates. These images confirm the presence of hydrophobic fine clay agglomerates along with the hydrophilic clay particles in MFT. It is also observed that bitumen coats clay particles, bridges clay agglomerates, and is mostly absent as free bitumen in the bulk of the MFT sample. Our work paves the way for the use of nanophotonic tools in oil sands imaging and provides strategic suggestions for the development of better methods for clay sedimentation and bitumen recovery.